Syringes / Nozzles
The Comfort-in™ needle-free syringe/nozzle is a single-use syringe is capable of holding any dose from 0.01ml (1 unit) up to 0.5 ml (50 units) of any given liquid medication, it has a plunger to discharge the medication through a micro-orifice at the tip of the nozzle.
Dental Adapter
The dental adapter is designed for transportation of local anaesthesia in a dental clinic.
By gently attaching it to the threaded end of a dental syringe instead of the hypodermic needle.
Positioning Cap FLAT for Comfort-in™
The Comfort-in™ flat positioning cap for the needle-free injection system is a soft yellow silicone tip, that is attached to the Comfort-in™ syringes aka nozzles when used for cosmetic or dental applications, which is used to reduce the pressure when the injection is released.
Positioning Cap CURVED for Comfort-in™
The curved positioning caps have been designed for the Comfort-in™ needle-free injection system, to allow angled injections and to position the injector on an angle other than 90 degrees against the injection site such as the oral palate or Gingiva. It makes palatal injections possible when the Comfort-in™ is used by dentists.
Pen Adapter
The pen adapter is for transportation of medicine provided in pens cartridges such as insulin, hormone.
Vial Adapter (14mm)
Vial adapter (14mm) is for transportation of medicine provided in vials such that the crimped diameter of their tip is 14mm as per most insulin vials.
The adapter is to stay on the vial from new to empty.
The vial adapter is then pressed firmly onto the tip of the vial and then the syringe/nozzle can be screwed into the Comfort-in™ vial adapter.
Once the contents of the vial have been used up, the vial adapter and the vial are disposed of. Suitable for 5 & 10ml insulin vials and all other vials which have a crimp-diameter of 14mm.
This 14mm adapter is made specifically to be used with the Comfort-in™ needle free injection system.
Luer Adapter
The Luer adapter is a universal adapter for the Comfort-in™ needle-free injection system. It enables you to fill the needle-free syringes with liquid medications from any commercially available containers e.g. snap-off breakable glass ampoules, any small or large vials including soft-pack for saline solution and Lignocaine.
- How to use: Attach a large gauge needle (hypodermic) to the Luer Adapter’s tip and you can use it with absolutely anything and any type of vials available.
- Without a needle the Luer Adapter fits soft-pack for saline solution and local anaesthesia (Lignocaine).
It has a lid for preventing spills and air getting in the vial if needs to be kept for more than one single use. The Luer adapter combined with a drawing needle is ideal for loading the nozzle with oily based medication such as Testosterone and Estrogen.
- Attach the Luer adapter to your medication, insert the cone-shaped tip of the adapter into the soft-pack vial, or into the cannula.
- Open the lid of the adapter and screw the syringe/nozzle into the adapter clockwise, until it locks.
- Slowly pull out the plunger of the syringe until it is filled with the desired dose of medication.
- Remove the needle-free syringe/nozzle from the adapter by unscrewing it counter-clockwise.
